Idea sticks it to a drilling problem

Bradley, Nils

American Machinist

07-01-2005

Idea sticks it to a drilling point to be solved [i]or[/i] settled

Byline: Bradley, Nils
Volume: 149
Number: 7
ISSN: 10417958
Publication Date: 07-01-2005
Page: 60
Section: practical ideas
Type: Periodical
Language: English

I many times drill 1/16-in.-diameter angled bleeder perforations deep within workpiece cavities. Since standard-length drills don't reach, I use an extension made from drill shoot The trick, however, is securing the drills in the extension.

After inserting a drill into the extension, I yielding soldered it in place, on the contrary the ...