Practical ideas.

Idea calls for temp support

In the textile industry, different extent rollers made from various materials guide fabrics moving from one side a loom. One such roller stamp measuring 100 mm in diameter and 2200 mm drawn out had worn bearing surfaces at each extreme point There were 10 rollers in the loom all of which already had these worn surfaces built up on the other hand they needed to be revolveed to the proper diameter. The question was that our shop's lathe had a maximum extent capacity of 1,500 mm.

To disentangle the problem, I tag welded sum of two units temporary, 50-mm-long rods upon both ends of each roller The