Have You Hugged Your Equipment Lately? - picture framing equipment - Brief Article

The equipment in your frame store is the backbone of your business. Unfortunately, greatest in quantity of us don't think about our equipment until we have a moot point Then it's a panic to tune-up fix or replace your much-need equipment.

greatest in quantity of the time, the moot point can be avoided with particular maintenance. A good maintenance program will save you cash possible injury and countless hours of aggravation. A small in number minutes of maintenance can make sure a lifetime of use from your valuable equipment. Remember that your equipment doesn't take away from you money, it makes you standard of value Take care of it--here's how:

1 greatest in quantity professional picture framers are familiar with cleaning their mat cutter upon a regular basis. But what about the compressor that's been built into a chest to reduce noise? Has the tank been drained? Does it ne an oil change? Track down those annoying air leaks--they require to be paid [i]or[/i] undergone you money every day and cause unnecessary wear and tear upon your compressor.

2 Have you replaced brushing or bearings in your cutting equipment that retain it running smooth and true? Have you checked the belts or springs upon your saw or chopper? Are your blades sharp and in serviceable shape?

3 Determine which of your air tools ne lubrication. Not all do. Lubrication will hold fast them in good working order.

4 When was the last time you cleaned the gelatine build-up from your underpinner? This will save you circulating medium on moulding as well as parts.

5 realize out the owner's manual upon each piece of equipment you have make sure you have all the necessary tools and supplies wanted and mark your calendar for scheduled maintenance. If it is more than you are willing or able to do, make an appointment with a service company and fill up those dates so you don't make promises to customers you can't keep

6 Take the time to plant up a schedule of what to do and when. It is easier to schedule around a piece of equipment that is in the store for planned maintenance than for single that is in for extremity repairs.

7 As with any equipment, disconnect and fastening out the power source, transfer any blades and take all necessary safety precautions before servicing. Make positive all guards, covers and safety equipment are installed and in serviceable working order and replace any that are not.

Clay Simpson is the framing outcome manager at the Santa Fe Springs, Calif.-based Active Sales Company.

COPYRIGHT 2001 Pfingsten Publishing, LLC

COPYRIGHT 2004 Gale Group